Follow Infotel Systems on Facebook Follow Infotel Systems on twitter

Adtran Total Access 908e (2nd Gen) Normal Status Lights

Adtran Total Access 908e
FRONT PANEL
908e Back
 
 
 
 
REAR PANEL
Note: Status lights shown are configured for SIP via LAN 1 (ETH 0/1) to PRI (NET 3).
Light
Status
Description / / Suggested Action to Take
STATUS Unlit Bootstrap Mode - The boot code cannot be booted. During bootstrap mode VOICE, DATA, NET 1 - 4 LED's will be red.
Green (Flashing) Unit is powering up. On power-up the STATUS LED flashes rapidly for 5 seconds, during which time the user may escape to bootstrap mode from the CRAFT port.
Green (Solid) Power is on and the unit is functioning normally.
POWER Unlit No power.
Green (Solid) AC power is operational.
Amber AC power has failed. Battery backup is active.
VOICE Unlit All ports are inactive.
Green (Solid) At least one port is off hook.
Green (Flashing) At least one port is ringing.
Amber At least one port is in test.
Red Fault condition.
DATA Unlit Port is administratively shut down.
Green Layer 2 is up on a NET interface.
Red Layer 2 is down on a NET interface.
NET 1 - 4 Unlit Port is administratively shut down.
Green Link is up and in normal operation.
Amber Port is in test.
Red An alarm condition is present.
LAN 1 - 2 Unlit Link is down or port is administratively shut down.
Green (Solid) 10BaseT link is up.
Green (Flashing) 10BaseT link is up and traffic is flowing.
ETH 0/1 - 0/2
(Rear Panel)
Amber (Solid) 100BaseT link is up.
Amber (Flashing) 100BaseT link is up and traffic is flowing.

For more information or to have your device listed please contact Infotel Systems Inc

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228 . Contact Us

All content copyright reserved. Content may not be used without permission of Infotel Systems Inc