Follow Infotel Systems on Facebook Follow Infotel Systems on twitter

Cisco DPC3008 DOCSIS 3.0 Normal Status Lights


        Cisco DPC3008 
Bolded status/descriptions below indicate likely failures
Light
Status
Description / Suggested Action to Take
POWER Green (Solid) Normal operation
Green (Flashing) POWER LED will flash 1 time per second if Network Access is denied
Unlit No power
DS Green (Solid) Normal operation
Green (Flashing) Flashes during Downstream scan on initial startup, calibration & registration
Flashes 1 time per second if Network Access is denied
Unlit No Downstream signal
US Green (Solid) Normal operation
Green (Flashing) Searching for an Upstream signal on initial startup, calibration & registration
Flashes 1 time per second if Network Access is denied
Unlit No Upstream signal
ONLINE Green (Solid) Normal operation
Green (Flashing) Requesting High Speed data provisioning file on initial startup, calibration & registration
Flashes 1 time per second if Network Access is denied
Unlit LED will be unlit during initial startup, calibration & registration
No Internet connection can be found
LINK Green (Solid) Indicates a single device is connected to the Ethernet port & not data is being sent to/from the cable modem
Green (Flashing) Normal operation - Data is being transferred between the consumer premise equipment (CPE)
Flashes 1 time per second if Network Access is denied
Unlit When no devices are connected to the Ethernet ports

For more information or to have your device listed please contact Infotel Systems Inc

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228 . Contact Us

All content copyright reserved. Content may not be used without permission of Infotel Systems Inc