Follow Infotel Systems on Facebook Follow Infotel Systems on twitter

Cisco DPC3010 DOCSIS 3.0 Normal Status Lights


Cisco DPC3010
Bolded status/descriptions below indicate likely failures
Light
Status
Description/Suggested Action to Take
POWER Green (Solid) Normal Operation
Unlit No power
DS Green (Solid) Normal Operation
Green (Flashing) Flashes on initial power up & when performing a downstream scan
Green (Flashing) Flashes 2 times per second when Network access is denied
US Green (Solid) Normal Operation
Green (Flashing) Flashes on initial power up & when ranging
Green (Flashing) Flashes 2 times per second when Network access is denied
ONLINE Green (Solid) Normal Operation
Green (Flashing) Flashes on initial power up & during registration
Green (Flashing) Flashes 2 times per second when Network access is denied
LINK Green (Solid) When a single device is connected to either Ethernet or USB port and no data is being sent to or from the modem
Green (Flashing) When only one Ethernet or USB device is connected & data is being transferred between the consumer premise equipment (CPE) & the cable modem
Unlit When no devices are connected to either the Ethernet or USB ports
Notes:

- When both Ethernet & USB devices are connected to the modem at the same time & data is being transferred through only on of the devices
  (Ethernet or USB), the LINK LED status indicator illuminates continuously.

- Whenever data is being sent through both data ports (Ethernet & USB) simultaneously, the indicator blinks as described above.

For more information or to have your device listed please contact Infotel Systems Inc

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228 . Contact Us

All content copyright reserved. Content may not be used without permission of Infotel Systems Inc