Follow Infotel Systems on Facebook Follow Infotel Systems on twitter


MultiTech RF 820 or 860 Normal Status Lights

MultiTech RF 820 or 860
Light
Status
Description & Suggested Action (Likely Failures in Bold)
POWER Green (Solid) Power is being supplied to the RouteFinder.
Unlit Not powered. // Check the power.
STATUS Amber (Flashing) When functioning normally, the LED flashes.
Amber (Solid) The LED is solid when the RouteFinder is booting up, saving the configuration, restarting or updating Firmware.
Not blinking for extended period.  (No heart beat) Router lockup. // Reboot router. // Call Vendor.
LAN 10/100M Green (Solid) Lights when a successful connection to the 100 Base-T LAN is established.
Unlit When connected to 10 Base-T.
LAN LINK/ACT Green (Solid/Flashing) Lights when a the LAN Port has a valid Ethernet connection. Flashes when receiving or transmitting data.
Unlit No Ethernet signal from connected device.
WAN 10/100M Green (Solid) Lights when a successful connection to the 100 Base-T WAN is established.
Unlit When connected to 10 Base-T.
WAN LINK/ACT Green (Solid/Flashing) Lights when a the WAN Port has a valid Ethernet connection. Flashes when receiving or transmitting data.
Unlit No Ethernet signal from connected device.

For more information or to have your device listed please contact Infotel Systems Inc

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228 . Contact Us

All content copyright reserved. Content may not be used without permission of Infotel Systems Inc