Follow Infotel Systems on Facebook Follow Infotel Systems on twitter


Westell DSL Modem 2110 Normal Status Lights

Status LED's For Westell DSL Modem 2110
Light
Status
Description & Suggested Action (Likely Failures in Bold)
POWER Green The Modem power is on. Look at the other lights to troubleshoot connectivity issues.
Unlit Modem power off. // Turn the Modem on and try to re-connect.
READY Green (Slow Flashing) The Modem is turned on and attempting to connect.
Green (Flashing Fast) The Modem is turned on, is attempting to connect and is downloading any needed information.
Green The connection between the Modem and Verizon Broadband is established.
Green/Red (Flashing) A communication failure. // Check the Verizon Broadband System Status.
Red Modem test failed.
Red (Flashing) The Modem failed the power-up test. // Use the power switch on the back of the Modem to turn off the power, wait 15 seconds and then turn the Modem back on. Wait 45 seconds to allow the Modem to synchronize to the server and try connecting to the Internet.
Unlit Modem power off. // After checking the power supply, see above.
ETHERNET Green The Modem and Broadband are connected and the data is transmitting at a normal rate.
Unlit No link between the Modem and Computer. // Check the Verizon Broadband System Status, then troubleshoot the connection issue.

For more information or to have your device listed please contact Infotel Systems Inc

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228 . Contact Us

All content copyright reserved. Content may not be used without permission of Infotel Systems Inc