Follow Infotel Systems on Facebook Follow Infotel Systems on twitter


BV Tech SW1602 POE Switch Normal Status Lights





BV Tech SW1602 POE Switch
Bolded status descriptions below indicate likely device failures
Light
Status
Description / Suggested Action to Take
PWR SOLID The device is connected to the power supply properly
UNLIT The device is connected improperly or not connected to the power supply
LINK/ACT SOLID The corresponding port is connected properly
FLASHING The corresponding port is transmitting data
UNLIT The corresponding port is connected improperly or not connected
POE STATUS SOLID The corresponding port is connected with a PD (Powered Device) and powers the PD properly
FLASHING The PoE output of the corresponding port exceeds 30W
UNLIT The corresponding port is no PoE power output or no PD connected
POE-MAX SOLID The PoE power gets to the alarm value, and the available PoE power is less than 6W
FLASHING The PoE power gets to the maximum
UNLIT The PoE power works properly, and the available PoE power is more than 6W
G1/G2 SOLID The corresponding port is connected
FLASHING The corresponding port is transmitting data
UNLIT The corresponding port is connected improperly or disconnected
G1-F/G2-F SOLID The corresponding port is connected properly
UNLIT The corresponding port is connected improperly or disconnected

For more information or to have your device listed please contact Infotel Systems

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228

All content copyright reserved (c) 2021. Content may not be used without written permission of Infotel Systems Inc