Cisco DPC3010 DOCSIS 3.0 Normal Status Lights
Bolded status/descriptions below indicate likely failures
Light |
Status |
Description/Suggested Action to Take |
| POWER | Green (Solid) | Normal Operation |
| Unlit | No power | |
| DS | Green (Solid) | Normal Operation |
| Green (Flashing) | Flashes on initial power up & when performing a downstream scan | |
| Green (Flashing) | Flashes 2 times per second when Network access is denied | |
| US | Green (Solid) | Normal Operation |
| Green (Flashing) | Flashes on initial power up & when ranging | |
| Green (Flashing) | Flashes 2 times per second when Network access is denied | |
| ONLINE | Green (Solid) | Normal Operation |
| Green (Flashing) | Flashes on initial power up & during registration | |
| Green (Flashing) | Flashes 2 times per second when Network access is denied | |
| LINK | Green (Solid) | When a single device is connected to either Ethernet or USB port and no data is being sent to or from the modem |
| Green (Flashing) | When only one Ethernet or USB device is connected & data is being transferred between the consumer premise equipment (CPE) & the cable modem | |
| Unlit | When no devices are connected to either the Ethernet or USB ports | |
| Notes: - When both Ethernet & USB devices are connected to the modem at the same time & data is being transferred through only on of the devices (Ethernet or USB), the LINK LED status indicator illuminates continuously. - Whenever data is being sent through both data ports (Ethernet & USB) simultaneously, the indicator blinks as described above. |
||