EnGenius EGS2110P Normal Status Lights
Below = SFP Ports
Light |
Status |
Description / / Suggested Action to Take |
| POWER |
Green (Solid) |
Power on |
| Unlit |
No power |
| FAULT |
Unlit |
Normal behavior |
| Amber (Solid) |
Error |
| POE MAX |
Amber (Solid) |
The PoE device's output power
has exceeded total PoE limit. No additional devices can be powered on
via PoE |
| Unlit |
Additional PoE device may still be added |
| LAN MODE |
Green (Solid) |
LAN mode is activated |
| Unlit |
LAN mode is not activated |
| POE MODE |
Green (Solid) |
PoE mode is activated |
| Unlit |
PoE mode is not activated |
| LED MODE SELECTOR |
N/A |
Press to change between LAN and PoE mode |
| RESET |
N/A |
Press to restart the device to factory default
settings |
| LAN MODE (Per
Copper Port; Left LED indicator.) |
Green (Solid) |
A valid 1000 Mbps link is established on the
Port |
| Amber (Solid) |
A valid 10/100 Mbps link is established on the
Port |
| Unlit |
No link is established on the Port |
| POE MODE (Per
Copper Port) |
Green (Solid) |
Power is being supplied from the PoE switch |
| Amber (Solid) |
Error |
| Unlit |
No power |
| LINK/ACT (Per
Copper Port; Right LED indicator.) |
Green (Solid) |
A valid link is established on the Port |
| Green (Flashing) |
Packet transmission on the Port |
| Unlit |
No link is established on the Port |
| SFP PORTS |
N/A |
Small form factor pluggable Ports |
For more information or to have your device listed please
contact
Infotel Systems Inc
The Story Behind "Status Lights"
