Follow Infotel Systems on Facebook Follow Infotel Systems on twitter


EnGenius EGS2110P Normal Status Lights

EnGenius EGS2110P
Below = SFP Ports
EnGenius EGS2110P
Light
Status
Description / / Suggested Action to Take
POWER Green (Solid) Power on
Unlit No power
FAULT Unlit Normal behavior
Amber (Solid) Error
POE MAX Amber (Solid) The PoE device's output power has exceeded total PoE limit. No additional devices can be powered on via PoE
Unlit Additional PoE device may still be added
LAN MODE Green (Solid) LAN mode is activated
Unlit LAN mode is not activated
POE MODE Green (Solid) PoE mode is activated
Unlit PoE mode is not activated
LED MODE SELECTOR N/A Press to change between LAN and PoE mode
RESET N/A Press to restart the device to factory default settings
LAN MODE (Per Copper Port; Left LED indicator.) Green (Solid) A valid 1000 Mbps link is established on the Port
Amber (Solid) A valid 10/100 Mbps link is established on the Port
Unlit No link is established on the Port
POE MODE (Per Copper Port) Green (Solid) Power is being supplied from the PoE switch
Amber (Solid) Error
Unlit No power
LINK/ACT (Per Copper Port; Right LED indicator.) Green (Solid) A valid link is established on the Port
Green (Flashing) Packet transmission on the Port
Unlit No link is established on the Port
SFP PORTS N/A Small form factor pluggable Ports

For more information or to have your device listed please contact Infotel Systems

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228

All content copyright reserved (c) 2021. Content may not be used without written permission of Infotel Systems Inc