Follow Infotel Systems on Facebook Follow Infotel Systems on twitter


Cisco DPC3010
Normal Status Lights

Light
STATUS
Description & Suggested Action
POWERGreen (Solid)Normal Operation
UnlitNo power
DSGreen (Solid)Normal Operation
Green (Flashing)Flashes on initial power up & when performing a downstream scan
Green (Flashing)Flashes 2 times per second when Network access is denied
USGreen (Solid)Normal Operation
Green (Flashing)Flashes on initial power up & when ranging
Green (Flashing)Flashes 2 times per second when Network access is denied
ONLINEGreen (Solid)Normal Operation
Green (Flashing)Flashes on initial power up & during registration
Green (Flashing)Flashes 2 times per second when Network access is denied
LINKGreen (Solid)When a single device is connected to either Ethernet or USB port and no data is being sent to or from the modem
Green (Flashing)When only one Ethernet or USB device is connected & data is being transferred between the consumer premise equipment (CPE) & the cable modem
UnlitWhen no devices are connected to either the Ethernet or USB ports

Notes:

- When both Ethernet & USB devices are connected to the modem at the same time & data is being transferred through only on of the devices (Ethernet or USB), the LINK LED status indicator illuminates continuously.

- Whenever data is being sent through both data ports (Ethernet & USB) simultaneously, the indicator blinks as described above.

For more information or to have your device listed please contact Infotel Systems

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228

All content copyright reserved (c) 2021. Content may not be used without written permission of Infotel Systems Inc