Cradlepoint IBR900
Normal Status Lights

Light	STATUS	Description & Suggested Action
POWER	Unlit	No Power
	Solid Amber	Can indicate Bootup sequence of the Endpoint, Dashboard alerts that must be addressed (attending to these alerts may cause the LED to turn solid red), Status will remain Amber until the default password is changed or the device license needs to be renewed.
	Solid Green	Powered On
	Flashing Green	Rapid cycling of device power. Check to ensure any power supplied to device, particularly by vehicle battery is fully charged and supplying the correct voltage
	Solid Red	Indicates the WAN profile priority in the Connection Manager needs adjustment. If the Ethernet WAN is disconnected and the Modem with the active SIM is connected, then the Power LED is Red until the Modem with the active SIM is changed to have a higher priority in Connection Manager. Once that is changed the Power LED with turn Green
Wi-Fi	Unlit	No Wi-Fi Connected
	Solid Green	Wi-Fi is on and functioning normally
	Solid Yellow	Attention Log into NCM to troubleshoot. Note: Upon installation the light will be Yellow until the device is registered in NetCloud Manager
GPS	Unlit	Off/No Lock
	Solid Blue	GPS On/Locked
	Flashing Blue	Obtaining Lock
EMBEDDED MODEM	Unlit	Modem not connected
	Solid Green	Modem has established an active connection
	Flashing Green	Modem is connecting
	Solid Yellow	Modem is not active
	Flashing Yellow	Data connection error. No Modem connection possible
	Flashing Red	Modem is in the process of resetting. Flashing Red with Signal Strength LED = SIM dooe is not installed, Modem is off
SGNL	4 Solid Blue Bars	Strongest Signal
	1 Flashing Blue Bar	Weakest Signal

For more information or to have your device listed please contact Infotel Systems

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228

All content copyright reserved (c) 2021. Content may not be used without written permission of Infotel Systems Inc